GeoMax Zenith 16

7,295.007,795.00 Excl. VAT

Clear

GeoMax Zenith 16

7,295.007,795.00 Excl. VAT

The Zenith16 GNSS receiver is a cost-effective investment that guarantees reliable results. In combination with GeoMax field controllers and the X-PAD software, the receiver reaches its full potential. Providing top-performing technology at an affordable price, the Zenith16 GNSS receiver convinces with a remarkable performance ratio.

Datasheets and manuals

Frequently Bought Together

GeoMax Zenith16 RTK GPS GNSS receiver + + Unistrong stonex UT30 data collector +
Price for all three: 9,680.00

You may also like…

7,295.007,795.00 Excl. VAT

Clear

SKU: N/A Categories: ,
Brands:GeoMax
Description

GeoMax Zenith 16 Product Review

X-PAD Ultimate, the dedicated GeoMax field software, convinces with a perfect balance between clear structure, straight forward workflows and high functionality. Through close cooperation with key-users it is always kept up to date.
The GeoMax software offering is completed by X-PAD Fusion. X-PAD Fusion has the versatility and flexibility to fuse all data types from both GeoMax sensors and other 3rd party sources such as drones.

GeoMax Zenith16 RTK GNSS receiver equipped with a 555 channel GNSS board. In combination with an RTK Subscription this receiver is capable of providing centimetre accuracy in real time. Because The GeoMax Zenith16 supports GPS, Glonass, Galileo and Beidou satellite constellations it is capable of achieving this centimetre accuracy in tough conditions. Down below you can find which frequencies it supports. The GeoMax Zenith16 comes with Tilt&Go. A tilt sensor feature to help reach more inaccessible places.

Key features

  • RTK Enabled for 1-2cm accuracy. Compatible with RTK Direct
  • 181 channels
  • GPS, Glonass, Galileo and Beidou
  • UHF radio on 410-470Mhz frequency for rover/base setup 

 

What is it used for?

This receiver can be used in all applications where a centimetre accurate position is needed:

  • Surveying
  • GIS applications
  • Earthworks
  • Roadworks
  • Construction

 

What accessories do I need?

Depending on your requirements you have the following options:

  • Rover setup

When using this device in a rover configuration you may need the following accessories besides the receiver itself

  • RTK Correction service. To achieve centimetre accuracy your receiver will need RTCM correction data so it can calculate your exact position. Without an RTK provider your receiver won’t be able achieve a 1-2 centimetre accuracy.
  • Surveying software. Your receiver provides you with the coordinates you need but you still need surveying software in order to process this information. Which software you need depends on your needs. We recommend keeping it simple and don’t pay for things you don’t need. Having that said, if you do have to do complicated surveying work make sure you get the right software. Some recommended options are Apglos, Carlson, Aplitop and FieldGenius. If you need help, feel free to contact us by phone or via the chat below!
  • Data collector. You might need a tablet or controller to run your software on. The type of tablet depends on which software you have choosen as some are Android based and some are Windows.
  • Bracket and Holders. These are used to connect your tablet to your surveying pole so the whole set is easier to handle.
  • Surveying pole. In order to get the best performance out of your receiver you want to minimise the disturbances around you and give it a clear sight to the satellites above. That why its recommended attaching your receiver on a 2 meter minimum surveying pole. These come in fixed rods and in telescopic rods.

 

  • Rover Base setup

When you don’t have access to an  RTK network you might have to setup your own base station in order to receive corrections. These are the accessories you might need besides the receiver itself:

  • A second RTK GNSS receiver. preferably from the same brand. If you already have another one, then make sure they run on the same frequency.
  • Surveying software. Your receiver provides you with the coordinates you need but you still need surveying software in order to process this information. Which software you need depends on your needs. We recommend keeping it simple and don’t pay for things you don’t need. Having that said, if you do have to do complicated surveying work make sure you get the right software. Some recommended options are Apglos, Carlson, Aplitop and FieldGenius. If you need help, feel free to contact us by phone or via the chat below!
  • Data collector. You might need a tablet or controller to run your software on. The type of tablet depends on which software you have choosen as some are Android based and some are Windows.
  • Bracket and Holders. These are used to connect your tablet to your surveying pole so the whole set is easier to handle.
  • Surveying pole. In order to get the best performance out of your receiver you want to minimise the disturbances around you and give it a clear sight to the satellites above. That why its recommended attaching your receiver on a 2 meter minimum surveying pole. These come in fixed rods and in telescopic rods.
  • Tripod and Tribrach. These are needed to setup your base station with the second receiver. The Tripod gives good stability so errors in sudden movements of the base station are avoided.
  • External Radio. Most RTK GNSS receiver have an internal UHF radio build in. However, sometimes the power output is not strong enough to give you the workable distance you need and an external radio required. Internal radios can go up to 3 Watts that can work up to 8km. External radios can easily achieve 35 Watt outputs, thereby increasing your working range.

 

Comparable receivers from other brands

Global GPS Systems is currently in the process of independantly testing every single receiver on the market. In collaboration with an highly recognised surveying company we will be testing all receivers on its performance in increasingly more difficult environments, accuracy claims, Time to first fix, cold start and more. Want to know more about this? Please Contact us.

Specification

GeoMax Zenith 16 Specification

Weight 5 kg
Dimensions 30 × 30 × 20 cm
Accuracy level

Centimeter accurate

Tilt Sensor

No

Channels

181

GPS

L1, L2

Glonass

L1, L2

Galileo

E1, E5b

BeiDou

B1, B2

Battery type

Internal

Radio configuration

External radio

Radio frequency

410-470 MHz

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Select your currency
EUREuro