South INNO7 Rover set

South INNO7 RTK GNSS receiver is equipped with a 336 channel GNSS board. In combination with an RTK Subscription this receiver is capable of providing centimetre accuracy in real time. The South INNO7 is equipped with a high-speed 5G full net com module, which supports the latest 5G communication network and gives RTK’s high speed information interactions and wider expansion space in the big data era. Based on intelligent PPP dial up technology, INNO7 realises automatic dealing in real-time and keeps online during working. The INNO7 adopts an internal radio with 3W maximum transmission power to achieve the typical working range as 15km through “Far-Link” protocol. The transmission bandwidth becomes large, which perfectly solves the problem of large data volume of multiple constellation transmissions. And the power consumption can reduce 60% in the same amount of data transmission compare to the traditional RTK. It comes with a HD 1.54 inch color LCD touch screen with high brightness and low power consumption. It is suitable for fieldwork. With the touch screen you have access to all settings, information and functionalities. The INNO7 has a standard IMU tilt sensor. This can be used for tilt surveying up to 60 degrees. Currently the IMU feature is only compatible with the South SurvX software and Microsurvey FieldGenius.

• 1x South INNO7 – 336 channel GNSS board
• 1x IMU upgrade for up to 60 degrees tilt surveying
• 2x Lithium-ion battery
• 1x battery charger and adapter
• 1x hard plastic carrying case
• 1x all direction UHF antenna

• 1x 30cm mounting pole
• 1x receiver adapter
• 1x measuring plate
• 1x hi-measuring plate
• 1x RS-232 to DB9
• 1x RS-232 to USB

• RTK Enabled for 1-2cm accuracy. Compatible with RTK Direct
• 5G Mobile data network enabled
• 336 channels
• GPS, Glonass, Galileo, Beidou, QZSS, IRNSS and SBAS
• UHF radio on 410-470Mhz frequency for rover/base setup at 1,2 or 3 Watt output
• E-bubble with Tilt sensor ( this feature is included by default
• IMU tilt survey up to 60 degrees (IMU Upgrade required)
• hot swappable battery system for continuous surveying
• WiFi
• USB
• Bluetooth
• RS-232
• NFC for contactless synchronisation
• Technology iVoice: Galaxy G1 Plus supports voice messages about the operating status of the receiver and operations. It is possible to select the language of voice messages
• IP67
• cloud service

This receiver can be used in all applications where a centimetre accurate position is needed:

• Surveying
• GIS applications
• Earthworks
• Roadworks
• Construction
• Agriculture
• Mapping
• Landfill
• Hydrographic
• UAV Base Station