Satlab Freyja Rover Base set Review
Satlab Freyja RTK GNSS Receiver
The TR7 is the new high-quality GNSS receiver of SatLab. It is an 800 channels multi-constellation and multi-protocol radio receiver, compatible with various brands. It has full band support for 4G/3G/2G cellular mobile networks and also supports WiFi/BT4.0/NFC/OTG. The tilt survey will be done by just shaking the RTK pole. A high-resolution OLED panel can assist surveyors to check the working states of the receiver. TR7 GNSS system provides surveyors with industry-leading GNSS solutions.
|IMU Tilt Sensor||60°|
|UHF Radio||410 – 470MHz|
|GPS||L1, L2, L5, L2C|
|GLONASS||L1, L2, L3|
|GALILEO||E1, E5, E5a, E5b, E6, AltBOC|
|BEIDOU||B1, B2, B3, B1C, B2a|
Measure directly with the SatSurv Software
Satsurv is a customized and easy-to-use Android software for field surveying tasks, such as Detail Survey, Data Stakeout, Cadastral, Surveying, Road Design and Data Management. It supports tilt survey, quasi-dynamic, PPK and static surveying mode. Equipped with built-in NFC, Bluetooth, FTP functions, Satsurv provides an industrial solution for efficient fieldwork.
As a new generation of the handheld controller, the SHC55 with an updated screen provides a wider vision and high visibility under direct sunlight. The latest software Satsurv contributes more intelligence to the terminal. With a full-keyboard design and flash charge, SHC55 is an excellent choice for your survey work since it is durable and trustworthy in the field in all situations.
- 5.5″ capacitive touch screen for fingers or stylus.
- Full energy supply for fieldwork assurance.
- The alphanumeric layout of the keyboard for easier input.
- The Android 10.0 operating system for productive survey projects and data.
GPS Survey pole
Make it easy to carry by mounting everything on a GPS Survey Pole. Recommended length is over 2 metres to minimise interference to your GNSS receiver and improve performance.
Data collector bracket
This is needed to ensure that your data collector stays firmly in place. It prevents it from being damaged unnecessarily and you don’t have to hold it in your hand all day.
Used to set up your base receiver. The 3 legs provide great stability to prevent it from falling or moving.
This is used as a mounting platform for your receiver on your tripod. It also requires an adapter which you can choose in the next step.
This is the connection between your tribrach and receiver. You can screw your receiver to the adapter and then place the adapter in your tribrach.