South Galaxy G9 Rover and Base set Product Review

The South Galaxy G9 Receiver!

The G9 rover integrates advanced technologies, including Intelligent Base signal locking, RTK integration, and Farlink protocol, enhancing the convenience of field surveying. Its UHF module with Farlink communication enables an impressive 10km working range. The Smart ROS system optimizes hardware components, ensuring efficient and reliable tilt measurement with a wide angle range. The built-in high-performance IMU compensator improves accuracy and productivity, allowing users to continue surveying even after a fixed solution is lost. The dual-battery system design provides a 15-hour working time in Rover+Bluetooth mode, with hot replaceable batteries for uninterrupted field work.

Channels	1598
IMU Tilt Sensor	60°
Internet Modem	4G
UHF Radio	410 – 470MHz
GPS	L1C/A, L2C, L2P, L5
GLONASS	L1C/A, L1P, L2C/A, L2P, L3*
GALILEO	E1, E5A, E5B, E6C, AltBOC*
BEIDOU	BDS-2: B1l, B2l, B3l, BDS-3: B1l, B3l, B1C, B2a, B2b

Measure directly into your coordinate system with the SurvStar Software

South H6 Data Collector

H6 is South’s newest generation professional Android controller. With its Android 8.1 operating system this data collector is lightning fast. The full QWERTY keyboard with separate keys for 26 letters and numbers makes input in the field faster for most surveyors, and meanwhile, benefits them with higher efficiency and improved productivity as well as being able to work well in the rain.

What can you expect with the South H6!

GPS Survey pole

Make it easy to carry by mounting everything on a GPS Survey Pole. Recommended length is over 2 metres to minimise interference to your GNSS receiver and improve performance.

Data collector bracket

This is needed to ensure that your data collector stays firmly in place. It prevents it from being damaged unnecessarily and you don’t have to hold it in your hand all day.

Tripod

Used to set up your base receiver. The 3 legs provide great stability to prevent it from falling or moving.

Tribrach

This is used as a mounting platform for your receiver on your tripod. It also requires an adapter which you can choose in the next step.

Adapter

This is the connection between your tribrach and receiver. You can screw your receiver to the adapter and then place the adapter in your tribrach.