FREE RTK CORRECTIONS - Join the NTRIP CAster

M8 Mini

KQ-geo M8 mini IMU RTK GNSS receiver is equipped with a 555 channel NovAtel 729 GNSS board. In combination with an RTK Subscription this receiver is capable of providing centimetre accuracy in real time. Because the M8 supports GPS, Glonass, Galileo, Beidou and SBAS satellite constellations it is capable of achieving this centimetre accuracy in tough conditions. Down below you can find which frequencies it supports. Magnesium Alloy+Dual-color mould, compact and rugged. Supports GPS, GLONASS, GALIEO, BDS, SBAS. Supports 60° tilt survery and electronic bubble calibration. FieldGenius9 data collection software. Dual power supply, 23 hours for static while 16 hours for RTK.

 

Channels 555 – 220
IMU Tilt Sensor 60°
  Internet Modem None
 UHF Radio 410 – 470MHz
GPS

 L1 C/A, L1C, L2C, L2P, L5 – L1 C/A, L2E, L2C, L5

GLONASS L1C/A, L2C, L2P, L3, L5 – L1C/A,L1P,L2C/A,L2P
GALILEO E1, E5, AltBOC, E5a, E5b, E6 – L1BOC, E5A, E5B, E5AltBOCi
BEIDOU B1, B2, B3 – B1, B2

RECOMMENDED DATA COLLECTORS: 

RECOMMENDED SOFTWARE: 

M8 Mini

End of Year Sale!

Request a Better Price!

SKU: kq-geo-m8-mini-imu Categories: ,
Brand:KQ-Geo

Global GPS Systems
What Our Clients Say
4.74 store rating (536 reviews) | 4.65 product rating

Ads1

FREE RTK CORRECTIONS - Join the NTRIP CAster

Description

M8 Mini Product Review

KQ-geo M8 mini IMU RTK GNSS receiver is equipped with a 555 channel NovAtel 729 GNSS board. In combination with an RTK Subscription this receiver is capable of providing centimetre accuracy in real time. Because the M8 supports GPS, Glonass, Galileo, Beidou and SBAS satellite constellations it is capable of achieving this centimetre accuracy in tough conditions. Down below you can find which frequencies it supports. Magnesium Alloy+Dual-color mould, compact and rugged. Supports GPS, GLONASS, GALIEO, BDS, SBAS. Supports 60° tilt survery and electronic bubble calibration. FieldGenius9 data collection software. Dual power supply, 23 hours for static while 16 hours for RTK.

 

  • RTK Enabled for 1-2cm accuracy. Compatible with RTK FIX
  • 220 channels
  • GPS, Glonass, Galileo, Beidou and SBAS
  • 3G Mobile data
  • UHF radio on 410-470Mhz frequency for rover/base setup
  • 2x hot swappable battery system for continuous surveying
  • Bluetooth
  • RS-232
  • IP67

This receiver can be used in all applications where a centimetre accurate position is needed:

  • Surveying
  • GIS applications
  • Earthworks
  • Roadworks
  • Construction
  • Agriculture
  • Mapping
  • Landfill
  • Hydrographic
  • UAV Base Station

Rover setup

When using this device in a rover configuration you may need the following accessories besides the receiver itself

  • RTK Correction service. To achieve centimetre accuracy your receiver will need RTCM correction data so it can calculate your exact position. Without an RTK provider your receiver won’t be able achieve a 1-2 centimetre accuracy.
  • Surveying software. Your receiver provides you with the coordinates you need but you still need surveying software in order to process this information. Which software you need depends on your needs. We recommend keeping it simple and don’t pay for things you don’t need. Having that said, if you do have to do complicated surveying work make sure you get the right software. Some recommended options are Apglos, Carlson, Aplitop and FieldGenius. If you need help, feel free to contact us by phone or via the chat below!
  • Data collector. You might need a tablet or controller to run your software on. The type of tablet depends on which software you have choosen as some are Android based and some are Windows.
  • Bracket and Holders. These are used to connect your tablet to your surveying pole so the whole set is easier to handle.
  • Surveying pole. In order to get the best performance out of your receiver you want to minimise the disturbances around you and give it a clear sight to the satellites above. That why its recommended attaching your receiver on a 2 meter minimum surveying pole. These come in fixed rods and in telescopic rods.

Rover/Base setup

When you don’t have access to an  RTK network you might have to setup your own base station in order to receive corrections. These are the accessories you might need besides the receiver itself:

  • A second RTK GNSS receiver. preferably from the same brand. If you already have another one, then make sure they run on the same frequency.
  • Surveying software. Your receiver provides you with the coordinates you need but you still need surveying software in order to process this information. Which software you need depends on your needs. We recommend keeping it simple and don’t pay for things you don’t need. Having that said, if you do have to do complicated surveying work make sure you get the right software. Some recommended options are Apglos, Carlson, Aplitop and FieldGenius. If you need help, feel free to contact us by phone or via the chat below!
  • Data collector. You might need a tablet or controller to run your software on. The type of tablet depends on which software you have choosen as some are Android based and some are Windows.
  • Bracket and Holders. These are used to connect your tablet to your surveying pole so the whole set is easier to handle.
  • Surveying pole. In order to get the best performance out of your receiver you want to minimise the disturbances around you and give it a clear sight to the satellites above. That why its recommended attaching your receiver on a 2 meter minimum surveying pole. These come in fixed rods and in telescopic rods.
  • Tripod and Tribrach. These are needed to setup your base station with the second receiver. The Tripod gives good stability so errors in sudden movements of the base station are avoided.
  • External Radio. Most RTK GNSS receiver have an internal UHF radio build in. However, sometimes the power output is not strong enough to give you the workable distance you need and an external radio required. Internal radios can go up to 3 Watts that can work up to 8km. External radios can easily achieve 35 Watt outputs, thereby increasing your working range.

 

Global GPS Systems is currently in the process of independantly testing every single receiver on the market. In collaboration with an highly recognised surveying company we will be testing all receivers on its performance in increasingly more difficult environments, accuracy claims, Time to first fix, cold start and more. Want to know more about this? Please Contact us.

Ads2
Specification

M8 Mini Specification

Brand

KQ-Geo

Accuracy level

Centimeter accurate

GNSS Board

336 channels, 555 channels

GPS

L1, L2, L5

Glonass

L1, L2, L3

Galileo

E1, E5, E6, AltBoc

BeiDou

B1, B2, B3

Internal internet modem

No Internet Modem

Radio configuration

Internal radio

Radio frequency

410-470 MHz

Radio protocol

PCC EOT, TrimTalk450

Battery type

Internal

IMU Tilt Sensor

Yes

IP Rating

IP67

Weight

790 g

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

RTK GNSS With 60° tilt:

GPS & GNSS

South INNO7

RTK GNSS Receivers

Kolida K30

GPS & GNSS

Carlson BRX7

GPS & GNSS

Stonex S990A

42%

GPS & GNSS

Kolida K1 Pro

GPS & GNSS

EFIX F7

RTK GNSS With internet:

GPS & GNSS

South INNO7

RTK GNSS Receivers

Kolida K30

GPS & GNSS

Tersus Oscar

GPS & GNSS

Carlson BRX7

GPS & GNSS

Stonex S990A

42%

GPS & GNSS

Kolida K1 Pro