Stonex S900 rover base Set Review
The Stonex S900 RTK GPS Receiver
Stonex S900 RTK GNSS receiver. In combination with an RTK Subscription this receiver is capable of providing centimetre accuracy in real time. Because The Stonex S900 supports GPS, Glonass, Galileo, Beidou and QZSS satellite constellations it is capable of achieving this centimetre accuracy in tough conditions. Down below you can find which frequencies it supports. The Stonex S900 comes in 2 models: the S900 with 555 channels and the S900A with 800 channels. Both model are IMU enabled for tilt surveying up to 60 degrees.
|IMU Tilt Sensor||60º|
|UHF Radio||410-470MHz, 902.4 – 928MHz|
|GPS||L1 C/A, L1C, L2C, L2P, L5|
|GLONASS||L1 C/A, L2C, L2P, L3, L5|
|GALILEO||E1, E5A, E5B, ALTBOC, E6|
|BEIDOU||B1, B2, B3|
Unboxing The Stonex S900 RTK GNSS Receiver
Unistrong SH5A Data Collector
SH5A is a handy and light Android device, it is perfect in situations where you need to use the alphanumeric keyboard frequently. It is an extremely light but reinforced and protected controller, suitable for working in uncomfortable environments. Its low weight makes it perfect for applications without the use of supports or with light and minimal supports. Its perfectly visible but small screen makes it compact, comfortable and easy to use. With SH5A, you can communicate easily and get the job done!
Measure directly into your coordinate system with Stonex Cube-A
With stonex Cube-A you can Measurement and layout in your coordinate system. With its many features, stonex Cube-A is one of the most advanced software packages on the market that is, however, very user-friendly! Export your data directly from the software to the CAD or GIS package. It supports files as .DXF .CSV . TXT .SHP and many more!
GPS Survey pole
Make it easy to carry by mounting everything on a GPS Survey Pole. Recommended length is over 2 metres to minimise interference to your GNSS receiver and improve performance.
Data collector bracket
This is needed to ensure that your data collector stays firmly in place. It prevents it from being damaged unnecessarily and you don’t have to hold it in your hand all day.
Used to set up your base receiver. The 3 legs provide great stability to prevent it from falling or moving.
This is used as a mounting platform for your receiver on your tripod. It also requires an adapter which you can choose in the next step.
This is the connection between your tribrach and receiver. You can screw your receiver to the adapter and then place the adapter in your tribrach.