FJD Trion C1 Handheld 3D LiDAR Scanner for Indoor Floor Plans
The FJD Trion C1 is a compact handheld 3D LiDAR scanner developed for indoor measurements, room scanning and digital floor plan creation. Designed for architects, interior designers, renovation contractors and building professionals, it provides a practical way to capture existing spaces without measuring every wall and room feature individually.
Combining LiDAR depth sensing with an integrated laser distance meter, the Trion C1 allows users to scan room geometry while verifying important dimensions on site. Its connected software workflow transforms captured measurements into editable floor plan drafts and textured 3D models, helping teams move from site inspection to drawing preparation with less manual work.
With a scanning rate of 230,400 points per second, 1 cm post-processing relative accuracy and a lightweight 950 g design, the Trion C1 is particularly suitable for residential properties, offices, commercial interiors and renovation projects where reliable existing-condition information is important.
Fast Indoor Scanning for Room Measurements
Measuring an existing building can involve recording dozens of individual dimensions, drawing sketches and checking that important room features have not been missed. The FJD Trion C1 simplifies this process by capturing three-dimensional spatial information as the operator walks through the interior.
The integrated LiDAR sensor continuously measures visible surfaces, collecting information about walls, floors, ceilings and other room features. This data is used to reconstruct the scanned environment and support the generation of floor plan drawings.
Under recommended scanning conditions, the C1 can capture an indoor area of approximately 200 m² in as little as three minutes. Actual scanning time depends on the building layout, furniture, obstacles and the level of detail required.
For renovation contractors and property measurement professionals, this can significantly reduce the time spent collecting initial site measurements compared with documenting every room through manual sketches and individual distance readings.
3D LiDAR Scanning with 1 cm Relative Accuracy
The Trion C1 uses direct Time of Flight (dToF) depth sensing with a 940 nm Class 1 LiDAR laser. It collects up to 230,400 measurement points per second and provides a depth scanning field of view of 140° × 56°.
The LiDAR scanning range extends from 0.1 to 6 metres at target reflectivity levels between 10% and 90%. This range is designed for typical interior measurement distances, where walls, doors and surrounding surfaces are generally located relatively close to the operator.
After processing, the system provides specified relative point cloud accuracy of 1 cm under reference conditions. This makes it useful for creating room layouts, documenting existing interiors and preparing floor plan drafts.
Relative accuracy describes the consistency of measurements within the processed scan. It should not be confused with absolute survey accuracy or the accuracy of the separate built-in laser distance meter. Important construction dimensions should always be checked before being used for fabrication or detailed design.
Integrated Laser Distance Meter with ±3 mm Accuracy
One of the most useful features of the FJD Trion C1 is its built-in laser distance meter. While LiDAR scanning captures the overall shape of a room, the laser measurement function allows operators to check specific distances that require greater precision.
The integrated laser supports measurements from 0.03 to 60 metres, with specified accuracy of ±3 mm under reference conditions. This is particularly valuable for checking wall lengths, room dimensions and other critical distances during renovation and interior design projects.
For example, a contractor preparing to install cabinets or partitions can capture the overall room layout and then verify selected dimensions with the integrated laser. This combines broad 3D measurement coverage with targeted distance checks using the same instrument.
The laser distance meter and the LiDAR scanner have separate accuracy specifications. The ±3 mm figure applies to individual laser distance measurements under the specified conditions, not to the entire reconstructed 3D model.
From Indoor Scans to Editable Floor Plans
The FJD Trion C1 is designed around a connected workflow that links scanning, measurement verification and floor plan generation. Rather than treating the point cloud as the final product, the system helps users turn captured room geometry into drawings that can be reviewed and refined.
Using the FJD Trion Creative app, operators can monitor the scanning process, review captured coverage and identify areas that may require additional measurements. Important dimensions can be checked with the integrated laser before leaving the building.
Once the scan is complete, the project can be transferred to FJD Trion Creative Portal for further processing and floor plan editing. The software creates a draft based on the scanned geometry, which users can review and adjust according to the actual building layout.
Walls, room boundaries, doors and windows can be refined using the captured 3D information as a reference. Finished floor plan drawings can be exported in DXF format for further work in compatible CAD software.
Automatic floor plan generation reduces manual drafting work, but the result should still be reviewed. Complex room geometry, furniture and partially hidden walls may require additional adjustments before the drawing is suitable for a project deliverable.
RGB Imaging and Textured 3D Models
In addition to LiDAR measurements, the FJD Trion C1 includes an RGB imaging system with a resolution of 1280 × 1080 pixels and a field of view of 120° × 110°. This provides visual information that can support the interpretation of captured interior spaces.
Through the FJD Trion Creative workflow, operators can generate textured 3D models representing the scanned environment. These models provide a useful visual reference for understanding room layout, wall positions and other visible features.
For architects and interior designers, having both a floor plan and a three-dimensional representation can make it easier to discuss existing conditions with clients. The visual model also helps users review room geometry during the drawing and planning process.
Real Time Coverage Checks in the Field
Incomplete measurements can lead to additional site visits, particularly when important walls, corners or openings have not been recorded properly. The Trion C1 helps address this by connecting to the FJD Trion Creative mobile app during scanning.
Operators can monitor the captured environment, identify potential coverage gaps and collect additional measurements before leaving the location. This is especially useful in occupied buildings where furniture, doorways and restricted access may prevent some surfaces from being scanned during the first pass.
The app also supports reviewing the floor plan draft and adding selected laser measurements. This gives building professionals an opportunity to check essential information while they are still on site.
Lightweight Design for Everyday Indoor Measurement
Weighing approximately 950 g, the FJD Trion C1 is designed for convenient handheld operation. Its compact dimensions of 140 × 115 × 310 mm make it practical to carry between rooms, floors and different properties.
The scanner offers up to five hours of battery operation on a full charge, supporting multiple indoor measurement sessions during a working day. Charging takes approximately two hours under the specified conditions.
For professionals regularly visiting apartments, houses, offices and commercial buildings, this combination of portable design and battery endurance makes the C1 a practical alternative to carrying separate measuring equipment for every task.
The device is intended for indoor use, with an operating temperature range of 0°C to 40°C. It is not waterproof and should be protected from rain, moisture and unsuitable operating conditions.
Applications in Building Measurement and Interior Projects
Residential Renovation and Remodelling
Renovation contractors can use the Trion C1 to capture existing room layouts before planning changes to walls, kitchens, bathrooms and other interior spaces. The floor plan workflow helps prepare measured drawings, while the built-in laser allows important dimensions to be checked during the site visit.
Interior Design and Space Planning
Interior designers can scan existing rooms and generate editable floor plan drafts as a starting point for design work. The 3D model provides a visual reference for room proportions, wall locations and the arrangement of interior spaces.
Architectural Surveys and As-Built Documentation
Architects and building measurement professionals can use the C1 to document existing conditions before refurbishment or design work. The captured measurements provide a useful basis for preliminary floor plans and interior layouts, with additional verification where engineering-grade accuracy is required.
Real Estate and Property Documentation
Property professionals can use the scanner to record room layouts and prepare floor plan information for houses, apartments and commercial buildings. Its portable design makes it suitable for visiting multiple properties, while the software workflow helps organise the captured information into practical drawings.
Facility Management and Building Records
Facility managers can use the Trion C1 to document office layouts, rooms and other interior spaces. Updated floor plans can support space management, maintenance planning and building documentation, particularly where older drawings no longer reflect the current layout.
Construction Site Measurements
Construction professionals can use the C1 to capture interior conditions before installation or refurbishment work. The combination of room scanning and laser measurement is useful for preparing site documentation and checking selected dimensions, although final fabrication and setting-out measurements should be verified independently.
FJD Trion Creative App and Creative Portal
The FJD Trion C1 works with FJD Trion Creative, a software environment developed for indoor scanning and floor plan workflows.
The mobile app supports scan monitoring, coverage review and on-site measurement checks. After capturing the space, the project can be processed through Creative Portal, where users can review the 3D mesh, refine floor plan elements and export completed drawings.
DXF export allows floor plans to be transferred into compatible CAD software for further editing and project preparation. Textured 3D models and floor plan reports provide additional ways to review and share captured building information.
Cloud processing, export availability and advanced software functions depend on the selected Creative Portal service configuration. Users should check the available software functionality and processing requirements for their intended workflow.
FJD Trion C1 at Global GPS Systems
The FJD Trion C1 is designed for professionals who regularly measure indoor spaces and need an efficient way to convert site measurements into usable floor plans. Its combination of handheld LiDAR scanning, integrated laser measurements and floor plan processing makes it particularly relevant for renovation contractors, architects, interior designers and building documentation specialists.
At Global GPS Systems, we help customers choose professional measuring and LiDAR equipment suited to their applications. Contact our team for guidance on the FJD Trion C1, compatible mobile devices, software requirements and the accessories needed for your indoor scanning workflow.




















Reviews
There are no reviews yet