Within your surveying software you can create point or load in your Digital terrain models for staking out.

You will need this to run your software on. This is the link between your software and GNSS receiver. The selection of data collectors depends on the software you have chosen since it either runs on Android or Windows

Make it easy to carry around by mounting everything on a surveying pole. Recommended length is 2+ meters to minimise interferences for your GNSS receiver and improve performance.

Used to setup your base receiver. its 3 legs provide great stability to prevent it from falling or moving.

This is used as a mounting platform for your receiver on your tripod. It also need an adapter which you can choose in the next step. With its 3 screws you can level it. Also it has the option to come with a laser or optical plummet to make sure you can set it up directly over a marked point but this is mostly used for total stations

This is the link between your tribrach and Receiver. You can screw your receiver onto the adapter and then place the adapter into your tribrach.

normally the internal radio has a range of approximately 5KM in perfect conditions. If this is not enough an external radio is what you need. Giving a power of up to 35W. Please make sure when using it in your country you comply with all the regulations when it comes to transmitting high powered radio signals.